Our works

Portuguese marble coffee table — a monolithic look from five panels.

- Dimensions: top 1600 × 1600 × 20 mm, four sides 1600 × 400 × 20 mm
- Construction: hollow cube, panels joined on the inside with precise 45° mitre cuts; bottom edges cut 90°, 1 mm bevel on every edge
- Finish: satin on both faces, keeping glare low while letting the veining glow.
- No visible screws — internal anchors make the piece float visually.
- Delivery pre-assembled.

Marblella column shelves — five identical units, each combining a vertical core and six floating shelves.

- Material & colour matched to client’s reference slab (see hero photo)
- Shelves secured by three hidden steel pins, 150 mm long, anchored inside the core for a weightless look
- Satin finish on both faces; every edge cut at 90° with a crisp 1 mm chamfer
- Delivered as five fully pre-assembled columns, installation time on-site < 30 min per unit.

Wall shelves — sleek marble ledges with a sculpted 45° front lip.

- Two lengths: 1818 × 430 × 30 mm (18 pcs) & 1150 × 420 × 30 mm (6 pcs). Each gets a 50 mm front edge, beveled at 45°, rising 20 mm above the deck.
- Satin finish on every face; all borders cut 90° with a crisp 1 mm chamfer.
- No visible hardware — shelves rest on concrete blocks anchored inside the wall.
- Delivery in pre-fabricated units.

Rosa Portugal marble countertop — a warm blush surface with flowing caramel-grey movement.

• Dimensions: 3200 × 950 × 20 mm (cut to the cabinetry line, one clean monolithic plane)
• Construction: slab cut to template with tight tolerances; underside locally reinforced where spans/loads require it
• Finish: honed on the top and edges — low glare, but the colour stays deep and “alive”
• Edgework: straight 90° profile with a crisp 1 mm chamfer for durability and a sharp architectural read
• Fixing & install: no visible hardware — set on a continuous adhesive bed, seams avoided/kept minimal, delivered ready for use

Zürich marble mosaic floor — a framed “stone carpet” with crisp geometry and warm contrast.

• Dimensions: 2500 × 1200 × 20 mm (full panel, including border frame)
• Stones: Estremoz Branco field, Negrais graphic lines + border, Rosa Portugal accents for depth and definition
• Pattern: symmetrical inlay with double-line geometry and centred diamond markers — designed to read sharp from every angle
• Fabrication: CNC / waterjet precision cuts, dry-assembled in the workshop, numbered pieces and tight joints for clean alignment on site
• Finish: polished on all visible faces — high clarity, strong contrast, and maximum colour saturation
• Delivery & install: supplied as pre-set sections for fast laying; minimal grout lines, geometry locked before it ever reaches the site

Rosso Levanto × Veria Green marble mosaic — a bold harlequin floor with Italian drama and deep green tension.

• Dimensions: 2600 × 1380 × 20 mm (full panel, framed perimeter)
• Stones: Veria Green as the dark field; Rosso Levanto diamonds for a high-contrast rhythm
• Pattern: continuous diamond grid with strict alignment — designed to read cleanly along the full length
• Fabrication: precision-cut pieces, dry-assembled in the workshop, then numbered for fast, mistake-free installation
• Finish: honed on all visible faces for maximum depth, colour saturation, and crisp veining
• Delivery & install: supplied as pre-set sections; tight joints, minimal grout, geometry “locked” before it reaches site

Marble insert upgrade for an IKEA side table — a fast switch from mass-made to one-of-one.

• Dimensions: Ø440 × 20 mm
• Construction: CNC-cut marble disk, flush seating; no screws — the insert locks visually by precision fit
• Finish: satin/honed for a soft, low-glare surface
• Edgework: crisp 1 mm chamfer for a sharper silhouette and better chip resistance
• Turnaround: made in a few days, delivered ready to install — instant visual upgrade with real stone weight and depth

IKEA is a registered trademark. StoneToHomes is not affiliated with IKEA and is not an official partner.

Bar top, tailored from a single 40 mm slab of deep-black marble.

Portuguese marble concept piece — a monolithic look from five panels (part of Marble Portugal projects).

- Shape: two straight runs (2 000 × 650 mm + 1 840 × 650 mm) plus a quarter circle corner — total 2.9 m²
- Finish: mirror-polished face, sand-finished back, all edges cut at 90° with a crisp 2 mm bevel
- No mounting holes — the bar floats on a concealed frame for a pure monolithic look.

Bar tops, cut from 20 mm Greek Volakas marble with a bright white base, flowing grey-beige veining, and natural crystalline depth.

Restaurant stonework project in Volakas marble — a clean, light, architectural composition designed for a refined bar interior.

• Material: Greek Volakas marble with visible crystals and soft linear movement
• Application: bar countertops for a restaurant
• Shape / scope: custom-fabricated pieces with a total area of 8 m²
• Thickness: 20 mm
• Cut-outs: openings prepared for the coffee machine and sink
• Edge detail: all edges finished with a crisp 1 mm bevel
• Finish: matted surface for a clear, elegant reading of the stone pattern

Mirror, sculpted from a solid 30 mm body of Negrais — a Portuguese Lioz limestone with a dense marbled pattern and crystalline depth that comes alive in the light.

• Size: 1 500 × 700 mm overall
• Material / shape: solid Negrais frame with a free-form outer contour and a matching irregular inner opening
• Finish: fully polished face and profile, with softly rounded edges that emphasize the volume and flow of the stone
• Mounting: reinforced fixing with two continuous Z-clips, top and bottom, across the full width
• Placement: suitable for floor-standing use or wall mounting
• Weight: approx. 100 kg

Kitchen countertop in 20 mm Estremoz Creme Veined marble, selected for its soft warm base, delicate veining, and subtle translucency under task lighting.

Portuguese marble kitchen project — a calm, refined composition where the stone stays understated by day and reveals extra depth when the lighting above the work surface is switched on.

• Material: Estremoz Creme Veined marble
• Application: custom kitchen countertop
• Thickness: 20 mm
• Cut-outs: prepared for the sink, hob, and tap
• Finish: matte surface for a softer, more natural reading of the stone
• Edge detail: all visible edges finished with a crisp 1 mm bevel
• Light effect: gently translucent under integrated lighting above the worktop

Moca Creme limestone countertop with an integrated sloped sink — a quiet architectural piece built from 20 mm stone. The stone looks like travertine.

• Dimensions: countertop 1470 × 530 × 20 mm, with a custom integrated sink zone and side control area.
• Construction: sink box assembled from stone panels with precise 45° mitre cuts, creating a clean built-in basin without a standard ceramic insert.
• Sink detail: inclined bottom panel directs water toward a narrow linear drain; siphon opening positioned exactly on the centre line.
• Openings: five technical holes — four for the tap / control fittings and one for the siphon.
• Finish: lightly brushed visible face, giving the limestone a soft tactile surface while keeping the warm Moca Creme tone natural and calm.
• Edgework: exterior edges finished with a crisp 1 mm bevel for durability and a sharper architectural read.
• Fabrication: custom-cut, dry-checked and delivered as a ready-to-install stone assembly.

A custom marble countertop with an integrated rectangular sink — minimal, precise and built as one continuous stone element.

• Dimensions: countertop 1610 × 490 × 20 mm, with an integrated basin formed directly inside the stone surface.
• Sink geometry: rectangular basin with a clean internal opening of approximately 630 × 295 mm and a total basin module of 670 mm.
• Construction: all visible joints inside the basin and between the basin and countertop are made with 45° mitred cuts, creating a sharp monolithic look.
• Openings: two technical holes — one for the tap and one for the siphon.
• Finish: honed visible face, giving the marble a soft matte surface and a calm, architectural appearance.
• Edgework: fine bevel on the visible perimeter; front and side edges are finished and honed.
• Fabrication: custom-cut, assembled and finished as a ready-to-install stone sink and countertop piece.

A polished Rosa Portugal marble kitchen composition — soft, warm and architectural, with the countertop and backsplash cut from the same Portuguese stone family.

• Elements: kitchen countertop and matching stone backsplash.
• Material: Rosa Portugal marble, selected for a warm pink tone and natural Portuguese character.
• Countertop: 20 mm marble slab, estimated material volume 3.38 m².
• Finish: polished visible face, rough-finished underside for installation.
• Edgework: meia-cana profile, giving the countertop a softer classical detail rather than a sharp modern edge.
• Backsplash: 15 mm marble, 500 mm high, with sections of 3150 + 300 + 300 + 600 mm.
• Backsplash finish: polished visible face, straight 90° cut edges.
• Technical details: installation holes and final cut-outs to be confirmed at the engineering stage.
• Fabrication: cut, finished and prepared as a coordinated stone package for the kitchen installation.

A custom Volakas marble countertop with matching backsplash — designed for a kitchen / bar unit with integrated technical cut-outs.

• Dimensions: main stone run approximately 3261 mm long, produced in 20 mm marble according to the project drawing.
• Material: Volakas marble, selected to match the required colour and veining reference.
• Openings: three technical cut-outs — for the tap, undermount sink and cooking hob.
• Sink detail: undermount sink fixed with custom marble support pieces, avoiding direct fixing of stainless steel to the marble.
• Construction: backsplash joints made with 45° mitred cuts for a cleaner, more continuous appearance.
• Finish: honed visible surface, giving the marble a soft matte architectural look.
• Edgework: 1 mm bevel on the exterior visible edges.
• Fabrication: custom-cut, finished and prepared as a coordinated countertop and backsplash set.

A complete Moca Creme kitchen stone set — including the main countertop, integrated sink, island countertop, backsplash, wall shelf and step covers.

• Dimensions: island countertop 2010 × 910 × 20 mm; main countertop approximately 3034 × 600 × 20 mm; backsplash and shelf produced according to the project drawings.
• Material: Moca Creme limestone, selected from reserved slabs marked for the project.
• Sink construction: integrated rectangular sink assembled from stone panels, with 45° mitred joints between the basin and the countertop.
• Details: cut-outs for hob, tap and valve; reinforced sink area with internal triangular stone supports.
• Shelf: long wall shelf with raised edge, prepared with hidden pin fixing for wall installation.
• Finish: brushed surface, giving the limestone a soft tactile texture.
• Edgework: 1 mm bevels on visible edges, with specific edge treatment for each element.
• Fabrication: custom-cut, detailed and coordinated as a complete ready-to-install kitchen stone package.

A set of custom Serpa Verde marble wall panels — designed as decorative vertical stone cladding with integrated preparation for lighting.

• Dimensions: three wall panels, total stone area 4.515 m²; main panel height 2580 mm, with custom widths according to the technical drawing.
• Material: Serpa Verde marble, produced from a reserved block.
• Construction: each stone panel is prepared with a plywood backing panel fixed to the reverse side.
• Lighting detail: plywood backing is reduced in width on both sides to allow space for LED channels.
• Finish: honed surface, giving the green marble a calm and natural appearance.
• Edgework: combination of 1 mm bevels and half-bullnose edges according to the panel position.
• Openings: no technical holes.
• Fabrication: custom-cut, backed and finished as a ready-to-install decorative wall panel system.

A custom Ocean Blue stone floor element — cut from a reserved slab to follow the exact geometry of the room.

• Dimensions: overall custom shape approximately 1867.5 × 1090 mm, produced in three separate stone pieces according to the technical drawing.
• Material: Ocean Blue natural stone, selected from a reserved slab.
• Geometry: non-standard floor outline with precise angled cuts and adjusted dimensions for uneven site conditions.
• Construction: three-piece layout designed to fit the final floor contour.
• Openings: no technical holes.
• Finish: honed surface, creating a soft matte appearance and reducing visual glare.
• Edgework: no special visible edge finishing required.
• Fabrication: custom-cut and prepared as a made-to-measure stone floor element for installation.

A custom natural stone floor produced for a private interior — calm, durable and designed as a continuous stone surface.

• Area: 80 m² of natural stone flooring.
• Format: cut-to-size floor pieces prepared according to the room layout and installation requirements.
• Material: selected natural stone with a balanced tone and pattern suitable for large interior surfaces.
• Layout: the floor was planned to keep the surface visually consistent across the space, with controlled joints and a clean overall rhythm.
• Finish: polished surface, giving the stone a soft matte appearance and a more architectural feel.
• Edgework: straight calibrated edges prepared for precise installation.
• Fabrication: custom-cut, finished and prepared as a ready-to-install stone floor package.

Full-height bathroom wall cladding in Volakas marble — produced as a complete set of custom panels for a continuous stone interior.

• Dimensions: custom panel sizes according to the bathroom layout, organised into upper and lower rows around the full perimeter of the space.
• Material: Volakas marble.
• Layout: panels divided into two horizontal rows, with the upper and lower panels ideally matched from vertically positioned slabs.
• Construction: exterior corners made with 45° mitred joints for a clean architectural edge.
• Technical panel: panel no. 15 produced in two versions — one with service holes and one spare version without holes for possible on-site adjustment.
• Openings: five technical holes in panel no. 15.
• Finish: polished surface, giving the marble a brighter and more reflective appearance.
• Edgework: 1 mm bevels on all visible sides, including the intermediate horizontal joint between upper and lower panels.
• Fabrication: custom-cut and finished as a complete marble wall cladding package for bathroom installation.

A compact custom marble coffee table — designed as a small sculptural object with a square top and a vertical ribbed base.

• Dimensions: square top 400 × 400 mm; total table height maintained at approximately 400 mm.
• Top construction: tabletop increased to 30 mm thickness for stronger proportions and improved fixing.
• Base: vertical marble ribs positioned under the top, creating a graphic architectural rhythm.
• Fixing detail: recessed grooves are cut into the underside of the tabletop to receive the legs.
• Construction: leg grooves made 10 mm deep, with a 0.25 mm allowance on each side for glue.
• Assembly: hidden glued joints keep the connection visually clean from the outside.
• Finish: finished according to the selected marble surface and final design direction.
• Fabrication: custom-cut, grooved, assembled and finished as a small ready-to-place marble furniture piece.